- TOSIZE.pt
- Do it yourself
- DIY Projects
Finishing the stairwell to the attic, by Chris
Create this project yourself with sheet material cut to size by TOSIZE.pt!
Chris
Challenging
1 minuut
Description
After we decided to install a fixed staircase instead of a loft ladder in our home, the stairwell had to be re-finished.
We opted for primed MDF panels. p>
Finishing the stairwell with MDF
The existing paneling did not fit nicely and was just too narrow for the new fixed staircase.
Both plywood (standard vlizo hatch) and MDF were also used. used to compensate for the difference in height.
After I had completely measured all sides, ie length, width and height per face, I could determine the individual plates. Because there was some difference in the distance (per corner) between the ceiling and the screed floor of the attic, I opted to have everything completely cut to size.
After delivery, I first checked everything. to fit and then glued and screwed the plates as a box.
Then the finishing was installed in one piece.
The dimensions of the project
The entire finishing is 130, 0x70.0x29.0 cm.
Tip! Also check out our handy DIY tips!
What now?
Want to make this DIY project? Check out Chris's saw list and complete your order easily.
€ 214,91
All materials used
View all sheet materials