Rollable formwork for the storage of roller skates, by Joris

Related projects
TOSIZE Furniture
Create DIY projects in a breeze!
Logo TOSIZE.pt
Start designing

Create this project yourself with sheet material cut to size by TOSIZE.pt!

Joris

Joris

NL

Above average

2 minutes

Description

A storage module on wheels for the storage of roller skates, which are used during events and workshops. I designed and built this piece of furniture myself. The skates are positioned at a slight angle of 5 degrees and are held in place by a small beam.

The cabinets are connected to each other with three hinges. The hinges allow the cabinet to open like a flight case, allowing skaters to grab their roller skates and swap them with their shoes. When the cupboard is closed, the skates can be easily transported.

Work description: how did you realize your project


  1. The underlayment wood first completely sanded with coarse and then fine sandpaper.

  2. After sanding and cleaning, I put all the planks together and made separate modules. First all the planks and later the housing.

  3. I marked all the screw holes with a pencil.


The housing is also glued in place, but the planks are only screwed in place so that they can be repaired when necessary. I chiselled the hinges out of the long sides so that the cabinet can be fully opened.

Finally, I screwed the wheels underneath and then lacquered everything so that the cabinet is firmly put together.

Final size: What are the external dimensions?

Closed: height 165.0 cm width 90.0 cm depth 80.0 cm
Open: height 165.0 cm width 180.0 cm depth 40.0 cm

p>

Tip! Also check out our handy DIY tips!

What now?

Want to make this DIY project? Check out Joris's saw list and complete your order easily.

€ 262,55


All materials used

Explanation

View all sheet materials