- TOSIZE.pt
- Do it yourself
- DIY Projects
Bulkheads/storage space in the attic, by Stephanie
Create this project yourself with sheet material cut to size by TOSIZE.pt!
Stephanie
Average
2 minutes
Description by Stephanie
I provided the small space under the sloping roof of the front attic and attic with doors to create storage space. I have thought about the system for a long time and also considered sliding doors, for example. In the end I thought that doors would give the sleekest result and would be the easiest to realize. I underestimated the job, but I am very happy with the end result. The fact that the MDF arrived sawn to size was a relief. It is sawn very precisely and the round finish on the edges feels nice (this is not a standard finish, but requires a small extra contribution).
How I made this project
First of all, I protected the PIR insulation boards with hardboard using: construction adhesive to the plates. I then attached a beam horizontally along the entire width of the floor and laid carpet behind it. I attached smaller beams vertically to the beam. The hinges would be placed on this. I then painted the MDF with Histor kitchen cabinet lacquer (first treated the sides with edge sealer). Then I attached the doors with hinges from Blum. Finally, I attached snaps to open the doors easily.
Dimensions of my DIY project
The outside dimensions can be adjusted to your own situation.
Tip! Also check out our handy DIY tips!
What now?
Want to make this DIY project? Check out Stephanie's saw list and complete your order easily.
€ 210,47
All materials used
View all sheet materials